C8 Corvette Coupe Chassis Strut X Brace - Carbon Fiber - Stingray, E-Ray

C8 Corvette Coupe Chassis Strut X Brace - Carbon Fiber : Stingray, E-Ray

For Stingray and E-Ray Coupe ONLY

The strut cross brace utilizes straight lines and overengineered components to maximize strength and rigidity, making it far stronger than the actual loads on the brace. Dome shaped all carbon fiber braces that do not attach to the strut provide far less torsional rigidity improvement (4% vs 8%). The high safety factor insures durability as well as preventing flexing and thus maximum chassis stiffening benefit. Those that have tracked the car attest to the improvements in handling, feel and lap times. All C8 Cross Braces are tested to 5 times maximum load conditions.
Adds strength in the event of a side or rear-end collision.
Keep chassis like new.
Patent(s) applied for.
Made in USA.

• Increase the performance and strength of your 2020-2024 Singray, Z51 and E-Ray Corvette Coupe. Does Not Fit Z06 / LT6
• Improves torsional rigidity by 8%, which improves your C8's steering feel and handling precision on the track
• Customer review and install video discussing how C8 Chassis Brace reduced body flexing
• The C8 chassis cross brace is made from carbon fiber tubes and polished 304 stainless steel hardware. This makes the brace extremely strong yet lightweight.
• The design's straight lines prevents flexing and spring and thus maximizes rigidity
• By mounting to the rear strut mounts compressive and tensile loads are directly controlled, eliminating diagonal movements of the strut mounts.
• Makes a huge impact on your car's engine appearance
• Installation is done easily by removing 2 bolts and 4 nuts, installing cross brace and re-installing those same bolts and nuts.
• The brace installs over the Engine Appearance Package (EAP) without issue
• Directly addresses an issue the lead chassis engineer for the C8, Ed Moss, pointed out.